![]() Provided bellow labelled "How_to_start_WinKFP.pdf" this will explain how toįor NCSExpert to install or update the daten files, copy the files from SP-daten-Į#\daten to the C:\NCSEXPER\DATEN\E#\ (where E# is whatever chassis Once downloaded you can now follow the instructions If not follow the above steps again and correct your error.ĭownload and install SPDaten files of your choice (always recommend the latest) Now to test if your cable installed correctly. Plugging it into a different USB port will allocate the INPA cable to a differentĬOM port and neither tool will see the cable until the original USB port is usedĪgain or changed in device manager and obd.ini as mentioned above. Very important to remember which USB port you connected your cable to as When done click File -> Save and exit out. So we need to change the Port to reflect our INPA cable which in our case is COM Navigate to C:\EDIABAS\BIN and find file obd.ini and open it with an editor such NoĬlose all windows to return to the desktop. Your changes are done we can proceed by clicking OK to accept the changes. May also change the COM port number here as well for tutorial I left it at 5. Now every driver is different but the important part is the settings such as latency Now in the property window click on the advanced Right click on your INPA cable driver for example mine is labelled "USB Serial But first lets make some changes to the cable. So we need to change this in the obd.ini file located in Navigate to Control Panel, Device Manager, and scroll to Ports (COM
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |